CNC to Art Video 10 – Mach 3 G-Code Verify – CNC …
Posted by on June 30, 2011
CNC to Art Video Series Video 10: This is the CNC Video series on how to take an image to a CNC File. This process is one that many CNC Users want to know, but there is not much info on. Here is your chance to get the inside scoop. For more information, please go to: www.cncinformation.com Before we head out to the shop and begin CNC Plasma Cutting, we will check out our G-Code program in Mach 3. This will give us some confidence when running our CNC Program. Mach 3 is a great CNC Control Program. It takes our G-Code and converts it into Signal for the CNC Controller. The CNC Controller then sends the signals out to either Servo Motors or Stepper Motors. These motors then move the axis to create motion.
Video Rating: 4 / 5
Filed Under: Types Of Diabetes - Comments: 16 Comments to Read
Tags: GCode, Mach, Verify, Video
top
loquillojackson said,
hello friend am from Ecuador, I would like to know then import G code as I do with the target of acquisitions of data and so the driver of the stepper motors … anything you send me my e aheras84@gmail.com and help me a lot in my thesis … regards
7545todd said,
why does’t your Z axis move up and down . for your torch../?????? thank Todd
cheong7204 said,
这个软件那里能下载？
robsonsilviobrenneis said,
I’m looking for a post of PowerMILL for mach3, you know where to get?
thanks
supperstorm said,
I have a CNC motor controller 3 axis Toshiba TB6560AHQ and 3 BS57HB56-03 Stepper Motors but when I power up the systems after while my motors “gets hot” without using them (in non operational mode) is that any normal?
Do you know if Mach3 v R1.83 can work with USB to Parallel port converting pluck? Because I have a laptop with no Parallel port so I bought a USB to Parallel port converting plucks “any suggestions welcome”
Thanks
TheMasterRCH said,
love this video!
4s4m4d said,
hi
could you tell me how to download demo version please!!!
molinobeer said,
How much do you pay for your Mach3 license? You can tell me by personal message if you prefer. =)
chaychay1234 said,
It would be great if you could show the finished piece. Its hard to imagine what the endresult will look like….
tbmach said,
Dude, nice video. Loose the hard pointer click.
avirostick said,
i just downloaded Mach 3 Wednesday. On Friday, I ran my first program and made sawdust . It’s the best feeling I’ve had in a long time. This will be a lifetime passion, I can just feel it now!
Roudeleiw said,
yes to the first question, no to the second question !!!! O K ?
cao3107873 said,
这个软件那里能下载？？谢谢！
joeygonzo said,
My bad, this is a plasma machine.
Not a mill.
joeygonzo said,
How come the Z axis was not moving up and down during the run?
randallcaster said,
Nice little video for beginners to mach3,
and nice advice.
I;m still trying to get all the fine points, but once you start studying some high-end cam software to go with it, it makes mach easier to learn!
Add A Comment
You must be logged in to post a comment.